Matt's BBQ Pits, LLC

 The Fine Tune 2454 smoker is built all out of 1/4" thick steel the main cooking chamber is 54 inches long and the firebox measures 24" x 24" x 24". This is a combo pit for smoking and grilling.  The firebox alone is a great sized charcoal cooking pit.    The fine tune smoker gives you more even heat throughout the main cooking chamber than a traditional offset smoker, typically within 5 degrees apart from the left to the right. The design also slows down the heat flow to the main chamber so you don't get high temp spikes while you are busy with the lawn or a quick run to the store.  Because its a reverse flow you can remove a couple of plates and shrink the size of your pit for small cooks to get wood efficiency. Unit comes with a threaded drain tube so you can install a ball valve.  The firebox is modeled after our chicken cooker to give you a good distance between the coals and your chicken or fajitas if your desires are to use the firebox as a griller.  The new 2018 model has the insulated top even on the 3/8 thick model. This creates great wood efficiency with this size pit. The wheels on it are heavy duty rated to 1000 lbs each and never had one go out. You can upgrade to steel if you desire. We have other options you can special order with the price listings below. 

Common options:

3/8" thick firebox with lid for grilling option $200

Insulated firebox with no lid $300.  Going insulated you lose the lid but is much more efficient with wood.

Steel wheels $100

Stainless steel shelf top $150

You can order yours as a traditional offset smoker with tuning plates for no extra charge. If you custom order with a double lid we do add $100 for the additional labor. The in stock units currently are reverse flow single lid.

You can order your smoker with a cover to help protect your investment.  Covers are made with thick heavy marine vinyl designed to be loose fitting for quite installation and removal.  They have grommets on the bottom so you can tie the cover down on the smoker. 2454 covers are $190.  We make our stacks tall so the smoker works well. If you want a cover we would suggest you order the stack as removable so you can cover your smoker.

Commonly called reverse flow smokers, bi-directional pits are known for having the most even temperatures throughout the main cooking chamber because the hot air and smoke is channeled to the left side of the pit by a duct work of plates beneith the racks and then back to the right side over the racks to the smoke stack.

We believe ours works with great flow by using the large diameter 4.5 inch and tall smoke stack. The tuning plates are adjustable.  We build this pit all 1/4".  The main cooking chamber measures 40 inches long.  It is made from 20 inch diameter pipe. 

The firebox is 20 inch by 21 inch tall.  It features slider air controls so you can adjust even with the change of wind direction. The firebox has a 10 inch by 20 inch space for heating sauce or beans on top of.

The heat distribution plates are removable so you can grill in the main cooking area too. We finished it out with our stylings and features like the super large shelf and slide out racks. It features a counter weight on the lid to help lighten the lift.  Upon special order and additional funds we can install your custom art to hide the counter weight if you need.

This pit is a great grilling and smoker combo with the firebox modeled after our chicken cooker to give a good distance between the coals and the fajitas or chicken. The firebox top on the new 2018 version coming out now is insulated. It makes a big difference and you can keep the grilling lid.

3/8" thick firebox with lid for grilling option $200

 You can order your smoker with a cover to help protect your investment.  Covers are made with thick heavy marine vinyl designed to be loose fitting for quite installation and removal.  They have grommets on the bottom so you can tie the cover down on the smoker. 2040 covers are $170.  We make our stacks tall so the smoker works well. If you want a cover we would suggest you order the stack as removable so you can cover your smoker.

This pit cooks great. With its design you will have a hard time getting the temp to run away from you.  Its very easy to use and we can keep the cabinet temp higher than the main chamber with our heat delivery system.  The Boss Hogg is a true combo grilling and smoking pit. You can Cold Smoke below 100 degrees in the cabinet too.

You can order your Boss Hogg with a reverse flow stack on the main cooking chamber. Under normal running conditions the cabinet runs at normal cooking temperatures, even hotter than the main chamber. So you can cook brisket, ribs, or chicken in the cabinet. But if you are doing a smaller cook only using the main chamber close off the cabinet stacks and open the reverse flow stack on the main chamber and the cabinet will only run at warming temperatures making smaller cooks in the main chamber quite efficient with wood. The reverse flow stack simply redirects the heat and smoke away from the cabinet.

You can order your Boss Hogg with a cover to help protect your investment.  Covers are made with thick heavy marine vinyl designed to be loose fitting for quite installation and removal.  They have grommets on the bottom so you can tie the cover down on the smoker. Boss Hogg covers are $180.  Comes with our zero leak removable reverse flow stack.

Features:

Pits measure 40"L x 20"W

Fire Box 23" L x 20" diameter

Smoke Cabinet 24"Wide x 20" Deep x 28" Tall

 Sliding Meat Racks

Heat distribution plates included

Large 3 Inch Thermometer

Fitted Trim Around the Lid

Pit comes with a cleanout tool

Common options:

Fully Insulated firebox with no lid $500.  Going insulated you lose the lid but it's much more efficient with wood.

Threaded drains for ball valves Included



Made in Pipe Creek, Texas.  Delivery in the San Antonio Area for $85.  Call for availability.  Order your barbecue pit today.  If you are not in Texas please request shipping cost before you place an order.

The Hog Pit is a true combo grilling and smoker pit. 

The all new Super Wide cabinet gives the Hog Pit an extra 220 square inches of cooking space making it as big as the 2016 Boss Hogg. You can cook ribs, brisket, or chicken in the cabinet as well because the temps in the cabinet can run at 275 without a problem. We made these changes so the 2017 Hog pit would give you a smoker as large as the 2016 Boss Hogg and the most desired features like the square firebox and casters on the handle side for maneuverability at a price tag of $1750 including taxes.

Features:

Pit main chamber measures 29"L x 20"W

Fire Box 19" L x 20" diameter for round

Cabinet 24"L x 20" deep x 28" H

This pit cooks great. With its design you will have a hard time getting the temp to run away from you.  Its very easy to use and we can keep the cabinet temp higher than the main chamber with our heat delivery system.  The Hog Pit is a true combo grilling and smoking pit. You can Cold Smoke below 100 degrees in the cabinet too.

You can order your Hog Pit with a reverse flow stack on the main cooking chamber. Under normal running conditions the cabinet runs at normal cooking temperatures, even hotter than the main chamber. So you can cook brisket, ribs, or chicken in the cabinet. But if you are doing a smaller cook only using the main chamber close off the cabinet stacks and open the reverse flow stack on the main chamber and the cabinet will only run at warming temperatures making smaller cooks in the main chamber quite efficient with wood. The reverse flow stack simply redirects the heat and smoke away from the cabinet. Will post a photo soon with the extra stack.

You can order your Hog Pit with a cover to help protect your investment.  Covers are made with thick heavy marine vinyl designed to be loose fitting for quite installation and removal.  They have grommets on the bottom so you can tie the cover down on the smoker. Hog Pit covers are $170.  If you want the reverse flow stack on the Hog Pit we would suggest you order the stack as removable so you can cover your smoker.



Built with 1/4" thick steel.  3/8 thick square firebox also available

Sliding Meat Racks

Heat distribution plates included

Large 3 Inch Thermometer

Extra Large Clean Out Door

Fitted Trim Around the Lid

Super Large metal shelf on this model

Pit comes with a cleanout tool

Firebox Options:  At the time of your order you can request an upgraded firebox.  We can build a squared shape firebox as shown on the Fine Tune Smoker 2040 for $175 which is a 20x20x20 firebox.  We can walk you through the benefits of both.

Common options:

3/8" thick square firebox with lid for grilling option $350

Insulated firebox with no lid $475.  Going insulated you loose the lid but is much more efficient with wood.

Insulated Cabinet $200

Steel wheels $120  If you want 4 steel wheels $240

Threaded drains for ball valves Included

Made in Pipe Creek, Texas.  Delivery in the San Antonio Area for $85.  Call for availability.  Order your barbecue pit today.  

We have locations to show between Pipe Creek and Helotes.  Call for an appointment 210-724-2404.

TheBoss Hogg 2454 is quite a large pit. We also threw in some fantastic features on this model. Its made from 1/4 inch material.  The firebox is 3/8" thick with an extra layer of 1/4" plate on the bottom.  The pit has a gate between the main cooking chamber and the cabinet and a smoke stack on the right of the main chamber so you can run it as a reverse flow smoker if you desire. Under normal running conditions the cabinet runs at normal cooking temperatures. But if you are doing a smaller cook close off the cabinet stacks, close the cabinet gate the cabinet will only run at warming temperatures making cooking in the main chamber more efficient with wood.

I know the current photo has the solid rubber wheels.  Your unit will come with 12" tall x 3.5" wide steel wheels. Will have better photos soon after we roll out the next unit.

Main chamber measures 54 inch long.

Firebox is 24"x 24" x 23" tall

cabinet is 24" x 24" x 34"  tall I believe and features 4 evenly spaced racks.  Sausage rack ins included with this pit.

Drain tubes are threaded so you can attach a ball valve.

We have locations to show between Pipe Creek and Helotes. Call for an appointment 210-724-2404.

Features:

Pit main chamber measures 41"L x 20"W and firebox 20 diameter x 20"

2016 Version features an extra large prep space on the left shelf and counter weight on the lid

Slide Out Meat Racks

Counter weight on the lid

Large 3 Inch Thermometer

Extra Large Clean Out Door

4.5  Inch Diameter Smoke Stack and tall so we don't blow smoke in your face

Fitted Trim Around the Lid

1,036 Square Inches
 

  Made in Pipe Creek, Texas.  Delivery in the San Antonio Area for $85.  This pit is designed to load in and out of a pickup truck without a forklift.



We have a location to show between Pipe Creek and Helotes. 

Our BBQ Pits are made from thick steel and provide efficient use of coals through heat retention.  They hold in heat and cook evenly.  Thick Grills and Durable Construction. 

Features:

Pit main chamber measures 29"L x 20"W and firebox 20 diameter x 16" length

Constructed of 1/4" steel pipe rolled here i the US. 

Extra Sliding Meat Half Rack

Large 3 Inch Thermometer

Extra Large Clean Out Door

4.5  Inch Diameter Smoke Stack and tall so we don't blow smoke in your face

Fitted Trim Around the Lid

Pit comes with a cleanout tool

Large shelf

Steel handle

Wheels.  The firebox is a nice feature.  Made in Pipe Creek, Texas.  $85 delivery fee in the San Antonio Area.  Order your barbecue pit today.  

Features:

Pits measure 40"L x 20"W

Constructed of 1/4" steel pipe rolled here in the US. Includes the counter weight.

Extra Sliding Meat Half Rack

Large 3 Inch Thermometer

Extra Large Clean Out Door

Improved Breathing Controls
4.5  Inch Diameter Smoke Stack and tall so we don't blow smoke in your face

Fitted Trim Around the Lid

1,036 Square Inches

Large shelf

Pit comes with a cleanout tool

Wheels.  The firebox is a nice feature.  Made in San Antonio, Texas.  Delivery in the San Antonio Area for $75.  This pit is designed to load and unload from a pickup truck without a forklift.

We have locations to show between Pipe Creek and Helotes. 

If you need a lot of cooking space for a great price take a look at this barbecue pit. The chicken cooker is perfect for chicken.  You really need a good distance betweek your coals and the fajitas to cook them just right without buring them.  This is a fun pit you can burn wood through as well if you want to cook ribs or brisket.  Comes with 4 wheels.

Built with 3/16 thick steel and double layerd on the bottom and sides 3/8 thick around the wood and coals. comes with long cleanout tool.

Features:

11 square feet of cooking space

Extra large shelf

Dual slide out meat racks

Upper Half rack slides out too

Pit chamber measures 2ft x 4 ft

Our Charcoal BBQ Pits are made from thick steel and provide efficient use of coals through heat retention.  They hold in heat and cook evenly.  Thick Grills and Durable Construction. 

Features:

Pits measure 29"L x 20"W

710 Suare Inchs of Cooking Space

Constructed of 1/4" pipe rolled from new material in the US.

Extra large shelf you can use

Pit comes with a cleanout tool

Made in Pipe Creek, Texas.  Delivery in the San Antonio area for $85.  This pit is designed to load and unload from a pickup truck without a forklift.

We have a location to show between Pipe Creek and Helotes. 

This pit is easy to load and unload from your utility trailer.  Its made from 3/16" thick steel for longevity.  Its great to load up in your trailer and take to the beach, lake, or hunting camp. 

Measures 28" long and is 20" diameter

Call to order (210)724-2404           

Enjoy a quality counter top pit for your outdoor kitchen.  Call and ask about options.  This standard size countertop pit fits with clearance in a 2ft x 3ft cutout. This is an easy drop in unit.  Its constructed of 3/16" thick steel. We can use 1/4 but the lid would be heavy.  All pieces are cut on our CNC machine.  We can add your company logo or custom name plate.  This model features a pull out ash drawer. We can build these pits with a firebox as well.

If you want to personalize you barbecue pit to have your name or business name inside the lid we can do that too. We do have to charge for programming time because its a custom CNC program for everybody.

This is a great pit for camping, fishing trips, or on the job site.  This barbecue pit comes in two options. It can sit on a park bench or on the ground as a stand alone pit or we can weld the necessary hardware to make it a trailer hitch receiver pit.

Pipe measures 24" long and 14" diameter.

Constructed of 1/4" thick steel

260 square inches of cooking space

features a slide out meat rack so you don't burn your hands while tending to your meat.